Glossary
Detection range in DCS
In DCS, the detection range is how far a unit’s radar picks up an aircraft with nothing in the way. DCS Planner reads the largest detection distance of the radar sensor, capped by its maximum measuring distance. Only a unit with no radar sensor uses the Mission Editor figure.
Also called: Search range, Detects at, SEARCH ring, DetectionRange.
The Mission Editor lists its own DetectionRange for every unit. For a unit that has a radar sensor, that figure can be larger than what the sensor sees, so the planner does not use it.
Detection is a flat distance. The 2D ring does not hide behind a ridge. Terrain masking shows in the 3D radar view.
In DCS Planner
The map draws the SEARCH ring, off by default. The encyclopedia labels the figure "Detects at" and the key-figures table "Search".
Threat profiles follow one rule: a site searches at least as far as it fires.
What it is not
- Is the detection range the same as the tracking range?
- No. Detection is how far the radar sees. Tracking is how far it can lock, which is never farther and often shorter.
- Is the detection range the DetectionRange in the Mission Editor?
- Not when the unit has a radar sensor. The Mission Editor figure is set apart from the sensor and can be larger than what the radar sees.
Example: the SA-3 Goa radars
The SA-3 Goa battery has 2 radars, each with its own detection range. The SA-3 TR tracking radar detects at 27 nm (50 km) and locks at 27 nm (50 km). The P-19 SR search radar detects at 43 nm (80 km) and has no lock range.
| Radar | Range |
|---|---|
| SA-3 TR detects at | 27 nm (50 km) |
| SA-3 TR locks at | 27 nm (50 km) |
| P-19 SR detects at | 43 nm (80 km) |