· DCS Planner

Guides

CombatFlite Alternative: Plan DCS Missions in the Browser

DCS Planner is a browser CombatFlite alternative for DCS World: no Windows install, no login, and it opens existing .cf files. CombatFlite is freeware from v1.1.3.0. Stay there when you need offline maps, rehearsal, a coordination card, or Excel.

This page sits next to the step-by-step DCS mission planning workflow. Use it when the route already lives in a CombatFlite .cf and you want to keep planning in a browser.

CombatFlite remains available as freeware from v1.1.3.0; see combatflite.com. This page does not rank the two tools.

What a CombatFlite alternative needs to do

CombatFlite is a Windows desktop planner. DCS Planner is a web app. The overlap that matters for a move is narrow: open the existing .cf, check the route on a DCS theater, then get the plan back into DCS World as a .miz, a DTC, or a kneeboard PNG.

DCS Planner currently supports 5 theaters: Cold War Germany, Caucasus, Syria, Persian Gulf, and Nevada (NTTR). You can plan for F-16C, F-15E, F/A-18C, A-10C II, AH-64D, M-2000C, F-14, F-14B(U), and C-130J. Both tools import and export DCS missions. CombatFlite also ships offline maps, rehearsal, a coordination card, and Excel. DCS Planner does not. Price is not a reason to switch: CombatFlite is free now.

What carries over from a CombatFlite .cf import

A .cf archive is a ZIP. DCS Planner reads the embedded DCS mission, then enriches it from CombatFlite mission.xml. The table is the mapping in the importer today. It is not a promise that CombatFlite-only briefing files come along.

Fields mapped by DCS Planner CombatFlite import (combatflite-import.ts).
FieldIn the .cfAfter importCarries over
Theater<Theater> (for example PersianGulf)Mapped to a planner map id when the theater is knownYes
Waypoint name<Name> on each waypointCopied onto the planner waypoint (an unnamed point is named Waypoint)Yes
Coordinates<Lat> and <Lon>Stored as decimal degrees; a waypoint missing either is droppedYes
Altitude<Altitude> in feet and <AGL> True/FalseAltitude in feet; AGL stays AGL, otherwise MSLYes
Time on target<TOT> clock string and <TimeLocked>Clock TOT; TimeLocked locks the TOTYes
Speed<GS>, <KTAS>, <KCAS>, <Mach>, <SpeedType>Ground speed, calibrated airspeed, and Mach when present; speed mode from SpeedTypeYes
Waypoint type<Type> (Steerpoint, IP, Target, Take off, Land, CAP, …)F-16C and F/A-18C get STPT, IP, or TGT; takeoff/land map onto the embedded DCS routePartial
Aircraft type<Aircraft><Type> (F-16C_50, FA-18C_hornet, M-2000C, Hercules, …)Mapped to a planner airframe; unlisted types fall back to F-16CPartial
Route, callsign, coalition, taskRoute Name, CallsignName/Number, Side, Task, UnitsPlanner route plus a fighter group; Units is clamped to 1–4Yes
PackagePackage Name, Tag, Side (enabled packages only)Attached as package hints on the imported flightYes
BullseyeBlueBullseye, RedBullseye, NeutralBullseye lat/lonBlue and red bullseye on the map when the embedded .miz does not already set one. NeutralBullseye is read but not placedPartial
DrawingsAirspace polygons, circles, orbits, reference pointsMap drawings (orbits as racetracks); duplicates of the embedded .miz are mergedYes
Mission date and startEnvironment Year, Month, Day, StarttimeUsed when the embedded .miz does not already set themYes
DCS linkageDCS_AirdromeId, DCS_LinkUnit, Waypoint_DCS_tasks_lua, FrqAirdrome, link unit, and task Lua on the DCS route waypoints; Frq becomes the group frequencyYes
Late activation / hiddenlateActivation, hiddenOnMapCopied onto the imported groupYes
Terrain elevationNot a waypoint field this importer readsTerrain elevation starts at 0 until the map samples terrainNo
Disabled routes and packagesEnabled=FalseFiltered out; they never become planner routesNo
Rehearsal, coordination card, ExcelCombatFlite desktop outputs, not XML fields this importer mapsNot imported. Stay in CombatFlite if you need those filesNo

DCS Planner can also export a CombatFlite .cf: the same ZIP the importer reads (embedded DCS mission plus mission.xml). Round-trip tests cover theater, player waypoints, bullseyes, and drawings. CombatFlite-only cards and rehearsal state are still not in that file. See DCS File Formats: .miz, DTC, CombatFlite, LotAtc for what each file carries.

Sample: a real .cf excerpt in DCS Planner

The XML below is a shortened copy of the importer test fixture (Persian Gulf, M-2000C route Enfield3, Al Dhafra AB to CAP BRAVO, blue bullseye). The second table is that fixture run through the live parser, not a mock.

<Theater>PersianGulf</Theater>
<Waypoint>
  <Name>Al Dhafra AB</Name>
  <Lat>24.257222222222</Lat>
  <Lon>54.534166666667</Lon>
  <Altitude>52</Altitude>
  <TOT>5/21/2024 5:15:00 AM</TOT>
</Waypoint>
<Waypoint>
  <Name>CAP BRAVO</Name>
  <Lat>26.859289211329</Lat>
  <Lon>56.35588762694</Lon>
  <Altitude>25000</Altitude>
  <TimeLocked>True</TimeLocked>
</Waypoint>
<BlueBullseye>
  <Lat>24</Lat>
  <Lon>54</Lon>
</BlueBullseye>
Parser output for the fixture (same values the planner would load).
ItemFrom the .cfIn DCS Planner
TheaterPersianGulfpersiangulf
Mission nameCF Import TestCF Import Test
Route / aircraftEnfield3 · M-2000Cm2000c
PackageStrike PackageStrike Package
Waypoint 1Al Dhafra AB · 05:15:00Al Dhafra AB · 24.2572, 54.5342 · 52 ft MSL
Waypoint 2CAP BRAVO · TimeLocked trueCAP BRAVO · TOT 06:15:00 · locked · speed mode Mach
Blue bullseyeLat 24, Lon 5424, 54

How to move from CombatFlite to DCS Planner

  1. In CombatFlite, save the mission as a .cf file.
  2. Open DCS Planner in a browser. The core planner is free and does not require a login.
  3. Import the .cf (the importer also takes .miz and .trk). If the file carries CombatFlite routes, load a route into the planner from the import dialog.
  4. Check theater, waypoint names, coordinates, altitude, TOT, and bullseye against the table above. See DCS Flight Plan: Waypoints, Headings & Routes for how the route reads on the map.
  5. Keep planning in the usual order: threats, terrain, then cockpit export. The pillar is how to plan a DCS mission.
  6. Export a .miz (units, drawings, bullseye), a native .DTC or DCS-DTC JSON, or a kneeboard PNG. For the Viper cartridge see the F-16 DTC guide.

Supported theaters and aircraft

DCS Planner currently supports 5 theaters: Cold War Germany, Caucasus, Syria, Persian Gulf, and Nevada (NTTR). Theaters that exist in DCS World but are not in that list are not available in DCS Planner, so this page does not cover them. CombatFlite documents a generic globe theater and elevation (.hgt) files on combatflite.com if you need a map we do not ship.

You can plan for F-16C, F-15E, F/A-18C, A-10C II, AH-64D, M-2000C, F-14, F-14B(U), and C-130J. After import, pick the airframe that matches the CombatFlite route so waypoint limits and DTC export stay honest.

CombatFlite vs DCS Planner

Side by side, not a ranking. Every CombatFlite cell cites combatflite.com. DCS Planner cells are features the repo ships today.

CombatFlite facts from combatflite.com. DCS Planner facts from the shipped importer, exporter, map list, and aircraft list.
TopicCombatFliteDCS PlannerCombatFlite source
Runs onWindows desktop (Win 7+, .NET 4.5). About 2.5 GB download with offline maps and elevation.Browser on any OS. No install. The core planner does not require a login.combatflite.com
PriceFreeware from v1.1.3.0. CombatFlite says a paid license is no longer required.Free.combatflite.com
ImportDCS .miz, other CombatFlite missions, Google Earth, Prepar3D flight plans..miz, .trk, and CombatFlite .cf.combatflite.com
ExportDCS .miz, .lua flights, Excel, kneeboard pack into a .miz, Viggen cartridge, Ka-50 ABRIS, CMDS lua, LotATC .json, Tacview .xml..miz, CombatFlite .cf, LotAtc .env, DCS-DTC JSON, native .DTC (F-16C, F/A-18C, M-2000C), PNG kneeboard, clipboard.combatflite.com
TheatersGeneric globe theater plus elevation (.hgt) files; DCS mission import.DCS Planner currently supports 5 theaters: Cold War Germany, Caucasus, Syria, Persian Gulf, and Nevada (NTTR).combatflite.com
Offline maps.mbtile offline maps shipped in the download.No offline desktop mode. The planner runs in the browser.combatflite.com
Mission rehearsalTimeline playback of flights, on-station times, and TOTs.Not shipped.combatflite.com
Paper and spreadsheetCoordination card, mission data card, and MS Excel export.PNG kneeboard only. No A4/A5 mission-data-card PDF and no Excel.combatflite.com
Line of sightLine-of-sight plot on the desktop app.3D radar / terrain-masking view at /radar-3d.combatflite.com

When to stay on CombatFlite

Stay on CombatFlite when the job is something DCS Planner does not ship. From combatflite.com:

  • You want a Windows desktop app with offline .mbtile maps and elevation in the download (about 2.5 GB; Win 7+, .NET 4.5).
  • You need mission rehearsal: timeline playback of flights, on-station times, and TOTs.
  • You need a coordination card, a mission data card, or an MS Excel export of those packs.
  • You generate a CombatFlite kneeboard pack and write it into a .miz from CombatFlite.
  • You use CombatFlite line-of-sight plots, sun position, or nav data from its atmospheric model.
  • You export a Viggen cartridge, Ka-50 ABRIS overlays, or CMDS lua for the F-16CM, F/A-18C, or A-10C.
  • You need CombatFlite's generic globe theater, .hgt elevation files, Prepar3D plans, Google Earth link-up, or Tacview static-object export.

DCS Planner matches a different constraint: a browser on any OS, no install, no login, and a .cf you can open and then export as .miz, DTC, or PNG. Use both if that split matches how you plan.

After import: waypoints, bullseye, kneeboard, DTC

Waypoints on the map show heading and distance on each leg. Coordinates stay decimal in storage; the display can be DD, DM, DMS, or MGRS. Details: DCS Flight Plan: Waypoints, Headings & Routes.

Bullseye from the .cf lands as a coalition reference, not a waypoint. Reading a bearing/range call: DCS Bullseye Explained (BRAA vs Bullseye).

The spider card needs that bullseye before PNG export. Copy the files into Saved Games\DCS\Kneeboard. Custom Kneeboard Pages in DCS covers the folders.

F-16C steerpoints can go out as a native .DTC or as DCS-DTC JSON. See DCS F-16 DTC Guide (Data Transfer Cartridge).

Open the planner

FAQ

Is DCS Planner a CombatFlite alternative?
DCS Planner is a free browser planner for DCS World that imports CombatFlite .cf files. It is not CombatFlite. It does not replace CombatFlite offline maps, mission rehearsal, a coordination card, or Excel export.
Can I open a CombatFlite .cf file in a browser?
Yes. DCS Planner imports .cf in the browser with no install and no login. The carryover table on this page lists which fields map onto the planner route.
Is CombatFlite still free?
Yes. CombatFlite states that beginning version 1.1.3.0 a paid license is no longer required to access its full functionality.
When should I stay on CombatFlite?
Stay on CombatFlite when you need the Windows desktop app with offline maps, mission rehearsal, a coordination card, Excel export, Viggen cartridge / Ka-50 ABRIS / CMDS lua tools, or CombatFlite line-of-sight plots.
Which DCS theaters does DCS Planner support?
DCS Planner currently supports 5 theaters: Cold War Germany, Caucasus, Syria, Persian Gulf, and Nevada (NTTR).