DCS Cold War Germany Mission Planning Guide

Click the map to drop waypoints
Mission date

Airfields 119

ICAOTowerTACANILS
ETAR09 · 277,493 ft804 ft
ETAD05 · 239,862 ft984 ft
EDFH03 · 217,159 ft1,621 ft
ETOU-6,998 ft453 ft
ETNN--7,828 ft295 ft
ETSB-7,982 ft1,509 ft
EDDI-09R · 27L6,516 ft154 ft
EDDT-26R · 08R7,687 ft115 ft
EDDB-25R · 07R · 25L9,232 ft148 ft
EDAV--8,048 ft112 ft
ETSH--8,730 ft246 ft
EDAM--8,025 ft341 ft
EDDH-05 · 23 · 15 · 339,678 ft72 ft
ETMN-267,628 ft39 ft
EDDP-298,074 ft420 ft
ETHF--2,894 ft561 ft
---1,890 ft938 ft
ETUO276,030 ft213 ft
EPSC--6,352 ft98 ft
EKCH-04L · 22R · 04R · 12 · 3010,256 ft26 ft
ESMS-17 · 359,006 ft217 ft
---7,270 ft1,201 ft
---2,822 ft272 ft
---2,822 ft1,056 ft
---2,822 ft30 ft
EDBT--8,015 ft935 ft
EDCJ--7,838 ft312 ft
---2,126 ft348 ft
---3,212 ft20 ft
---2,946 ft98 ft
EDRB247,582 ft1,207 ft
EKRN11 · 296,450 ft49 ft
EDUB--7,513 ft164 ft
EDCB--6,447 ft486 ft
--264,442 ft272 ft
EDDW-09 · 276,014 ft39 ft
---7,907 ft115 ft
---5,469 ft194 ft
ETHC--6,804 ft131 ft
EPCH--7,201 ft177 ft
EDBC--8,074 ft515 ft
EDDK-25 · 14L · 32L9,701 ft236 ft
---7,733 ft26 ft
---3,533 ft177 ft
EDAD--7,310 ft210 ft
EDDL-05 · 236,749 ft121 ft
EDDE-286,417 ft1,014 ft
EDUF--9,400 ft285 ft
ETHS--8,146 ft253 ft
EDDF-07L · 25L13,537 ft328 ft
---3,540 ft184 ft
---6,437 ft66 ft
---3,563 ft417 ft
ETEU-5,843 ft951 ft
---3,556 ft157 ft
---7,582 ft10 ft
---2,536 ft279 ft
---7,090 ft1,017 ft
EDHI-05 · 235,853 ft10 ft
EDDV-27R · 09R · 27L7,500 ft167 ft
---3,323 ft1,617 ft
---3,304 ft348 ft
---2,910 ft305 ft
---3,871 ft322 ft
---2,779 ft322 ft
---3,540 ft285 ft
EDHK-08 · 263,737 ft39 ft
EDCK--7,992 ft285 ft
ETNL--8,130 ft115 ft
---33 ft1,181 ft
---2,910 ft404 ft
---7,654 ft207 ft
---4,797 ft417 ft
EDHL--6,837 ft72 ft
---1,949 ft148 ft
---8,077 ft144 ft
---3,120 ft722 ft
EDON--7,280 ft49 ft
ETHM--5,266 ft600 ft
EDBN--6,742 ft177 ft
---7,772 ft148 ft
---2,946 ft49 ft
---2,638 ft715 ft
EDCO--4,541 ft922 ft
---7,444 ft108 ft
EDOP--8,291 ft171 ft
EDCP--7,710 ft23 ft
---7,710 ft135 ft
EDRP-7,615 ft1,312 ft
---3,540 ft148 ft
---1,959 ft1,099 ft
EDUG-265,833 ft138 ft
---6,585 ft59 ft
---1,959 ft174 ft
---2,034 ft755 ft
ETAS-7,841 ft1,089 ft
---3,658 ft125 ft
EDCS--8,084 ft184 ft
---4,856 ft413 ft
---6,250 ft121 ft
---5,413 ft115 ft
EDUT--11,263 ft243 ft
---7,274 ft282 ft
EDUW--7,116 ft56 ft
---3,471 ft249 ft
---3,537 ft23 ft
---1,955 ft220 ft
---1,932 ft148 ft
---2,638 ft364 ft
---2,638 ft262 ft
EDBW--7,894 ft259 ft
---3,563 ft82 ft
---1,949 ft33 ft
---7,831 ft223 ft
---1,900 ft272 ft
ETNW265,961 ft164 ft
EDCZ--8,018 ft249 ft
---5,154 ft397 ft
EDRZ037,844 ft1,083 ft

The DCS World Cold War Germany map is a Central Europe theater: the Fulda Gap as the labeled landmark, plains, NATO and East German airfields, and Berlin-area fields. DCS Planner loads that theater with the same airfield and frequency catalog the map uses, so you can build the route before you spawn.

This page is the Cold War Germany theater detail for the step-by-step DCS mission planning workflow.

Cold War Germany theater overview

Central Europe - Fulda Gap (980x800 km). A hop from Ramstein to Spangdahlem is a short fighter leg. A transit from Ramstein to Berlin is not. Plan fuel and time-on-target against those distances.

The catalog on this theater covers West German NATO and Bundeswehr runway fields, Berlin-area fields, East German fields, and runway fields in Poland, Denmark, and Sweden. The planner labels this theater Cold War Central Europe, plains terrain, with the Fulda Gap as the landmark. For the eastern Mediterranean theater, see the DCS Syria Mission Planning Guide. For the Strait of Hormuz, see the DCS Persian Gulf Mission Planning Guide.

Terrain runs from sea level on the North Sea to the low mountain ranges inland, such as the Harz and the Black Forest. DCS treats local time here as UTC+1, with no daylight saving.

DCS Planner currently lists 119 runway airfields and 108 helipads on Cold War Germany. Country outlines appear on the map tiles. The sim does not enforce real-world FIR or ADIZ rules unless the mission designer adds them. Coalition is blue, red, or neutral. Plan the route against the brief, the IADS the mission places, and the terrain, not as if national borders are simulated.

Fulda Gap and the central corridor

The planner's landmark for this theater is the Fulda Gap. The catalog includes a Fulda airfield in central Germany, with Fritzlar to the north-northwest. West German NATO fields such as Ramstein, Spangdahlem, Hahn, and Wiesbaden sit southwest of that corridor. East German fields spread around Berlin: Finow to the northeast, Holzdorf to the south, and Merseburg, next to Leipzig-Halle, to the southwest.

That split is how the catalog is grouped, not a simulated inner-German border. Put bullseye where the package will fight or talk, often that corridor or the Berlin area. Strike packages that need independent A, B, and C routes can use the DCS F-15E Mission Planning (A/B/C Routes) workflow. Viper steerpoints and COMM presets belong on a DCS F-16 DTC.

Key airfields, ATC and TACAN frequencies

Click an airfield on the Cold War Germany map for tower, ground, TACAN, and VOR when that data exists. The table below is a subset of the same catalog: key runway fields by region. Empty TACAN cells mean the catalog has no TACAN on that airfield, not that DCS has none in every mission.

Tower and TACAN from the DCS Planner Cold War Germany airfield catalog. Values change when the catalog is rebuilt from DCS.
RegionAirfieldICAOTowerTACAN
West Germany NATORamstein Air BaseETAR133.2081X
West Germany NATOSpangdahlem Air BaseETAD122.2032X
West Germany NATOHahn Air BaseEDFH119.5024X
West Germany NATOWiesbaden Army AirfieldETOU118.1088X
West Germany BundeswehrNoervenich Air BaseETNN123.00-
West Germany BundeswehrBuechel Air BaseETSB122.10118X
BerlinBerlin TempelhofEDDI119.50-
BerlinBerlin TegelEDDT124.50-
BerlinBerlin SchoenefeldEDDB121.30-
East GermanyFinow Air BaseEDAV125.80-
East GermanyHolzdorfETSH118.20-
East GermanyMerseburgEDAM127.20-
North GermanyHamburg FuhlsbuettelEDDH126.85-
North GermanyNordholzETMN142.90-
Central GermanyLeipzig-HalleEDDP129.00-
Central GermanyFritzlarETHF126.50-
Central GermanyFulda-126.00-
RAF in GermanyRAF GueterslohETUO122.10108X
PolandSzczecin-GoleniowEPSC121.25-
DenmarkCopenhagen KastrupEKCH118.10-
SwedenMalmo SturupESMS118.80-

Turn on the Nav Beacons layer for TACAN, VOR, and similar stations from the DCS terrain data. Put those frequencies on the kneeboard if you want them in the cockpit without leaving the jet.

Bullseye and navigation on Cold War Germany

Bullseye is a shared coalition reference, not a waypoint on the route. On a theater this wide, put it where the package will fight or talk, not in a distant corner of the map. A call of bearing and range from that point should still be useful when flights are at Fulda and others are still at Ramstein or over Berlin.

Import a .miz to load the mission bullseye, or right-click the map and choose Set bullseye here. See DCS Bullseye Explained (BRAA vs Bullseye) for how to read a call and how the planner draws the rings.

Click the map to drop waypoints. Each leg shows distance in nautical miles and a heading marked T (true) or M (magnetic once the mission has a date). Magnetic variation is not the same across this theater, so set the mission date before you copy a leg heading into a compass or HSI. See DCS Flight Plan: Waypoints, Headings & Routes for coordinate formats and airframe waypoint limits.

Straight-line examples from the catalog, true heading:

  • Ramstein Air Base to Spangdahlem Air Base: 47.7 NM, 313°T
  • Ramstein Air Base to Berlin Schoenefeld: 285.2 NM, 049°T
  • Fritzlar to Fulda: 37.1 NM, 158°T
  • Hamburg Fuhlsbuettel to Copenhagen Kastrup: 150.4 NM, 037°T

Terrain and safe altitudes

Low-level work over the plains is a different problem from a night transit over the Harz or the Black Forest. After the route exists, DCS Planner samples terrain along it: AGL clearance, a terrain profile, MSA, and peak markers. Raise the altitude or move the waypoint if a ridge sits on the nose.

Peak markers are on by default. Use them before you commit to a low ingress toward high ground. The 3D radar view shows terrain masking against SAM radar. The planner does not compute bingo fuel; check fuel in the cockpit and with the loadout builder.

Typical threats and where they sit

Threats are whatever the mission places. Cold War Germany does not ship a fixed IADS. Community and campaign missions often put layered air defences around defended East German fields and along the central corridor toward the Fulda Gap. That is a mission-design habit, not a map default.

In DCS Planner, place SAM and AAA units on the Cold War Germany map. Launchers show threat rings that use DCS engagement ranges. Draw ingress outside rings you cannot defeat, and use terrain later to hide from radar you cannot avoid. The SAM encyclopedia has detection, tracking, and launch ranges for systems the planner knows. See DCS SAM Threat Rings & Route Planning for engagement range vs NEZ and how to draw ingress around the rings.

Plan a Cold War Germany mission in the browser

Open DCS Planner and pick the Cold War Germany theater. Then:

  1. Open DCS Planner and select Cold War Germany. The planner default is Persian Gulf if no other map is stored, so switch the theater before you click the route.
  2. Click an airfield on the map, or use the catalog table on this page, for tower and TACAN when that data exists.
  3. Start the route at a West German, Berlin, or East German catalog field. Use North Sea or Baltic catalog fields such as Nordholz or Copenhagen Kastrup when the brief needs water.
  4. Put bullseye where the package will talk, often the Fulda Gap or the Berlin area, not in a distant corner of the map.
  5. Drop waypoints and check heading and distance on each leg before you commit fuel or time-on-target. Headings read M (magnetic) once the mission has a date, T (true) otherwise.
  6. Add the threats from the brief. Launchers show DCS engagement ranges. Draw ingress outside rings you cannot defeat.
  7. Read AGL clearance, MSA, and the terrain profile, especially on legs that leave the plains for the low mountain ranges.
  8. Export a kneeboard PNG, a .miz with units, drawings, and bullseye, DCS-DTC JSON, or a native .DTC for airframes that support it.

Import works for .miz, .trk, and CombatFlite .cf, so you can open an existing Germany mission and edit the route inline. The core planner is free and does not require a login.

Open the planner

FAQ

What area does the DCS Cold War Germany map cover?
The theater is Central Europe, labeled around the Fulda Gap. The catalog groups West German NATO and Bundeswehr fields, Berlin-area fields, East German fields, and runway fields in Poland, Denmark, and Sweden.
Where do I find Cold War Germany airfield frequencies?
DCS Planner shows tower, ground, TACAN, and VOR on an airfield when that data exists in the catalog. Click an airfield on the Cold War Germany map. This page lists tower and TACAN for a set of key fields from the same catalog.
What is the Fulda Gap on this map?
DCS Planner labels the Cold War Germany landmark as Fulda Gap. The airfield catalog includes a Fulda field in central Germany. Put bullseye where the package will actually talk, often that corridor or the Berlin area.
How do I plan a Cold War Germany mission in DCS Planner?
Open the planner, pick the Cold War Germany theater, set bullseye, click the route, place SAM or AAA rings, check AGL and MSA along the legs, then export a kneeboard PNG, a .miz, or a DTC.
Does DCS enforce national airspace on the Cold War Germany map?
No. The map includes several countries, but DCS does not apply real-world FIR or ADIZ rules unless the mission designer adds them. Plan against coalition IADS, terrain, and the brief, not as if national borders are simulated. The catalog currently lists 119 runway airfields on this theater.